SDcard reads are not going well. try a different card

Computerized Cutting Systems and Supplies – KLIC-N-KUT Forums Cutters & Equipment KLIC-N-PRINT 3D SDcard reads are not going well. try a different card

This topic contains 2 replies, has 2 voices, and was last updated by  Sandy 2 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #25288

    edgerley
    Participant

    my printer had been working fine the last time I turned it off. Now when I turned it on and tried to read the SDcard I get this message. (SDcard reads are not going well. try a different card ). I tried a new card and got the same message. Both cards read fine in my PC. I tried putting the card in and out server times and tried again with the same result. One time I did get the message (SDcard read error). But that only happened once. Everything else seems fine. It seems like the sdcard reader went bad.

    #25314

    edgerley
    Participant

    on the advice from Ron I reseated the cable connectors for the SDcard reader and that fixed the problem.

    #25331

    Sandy
    Moderator

    Thanks for letting us know what fixed the issue!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Pin It on Pinterest

Web Statistics