Continuous profile cut when exported to the machine.

Computerized Cutting Systems and Supplies – KLIC-N-KUT Forums Software Make The Cut! Continuous profile cut when exported to the machine.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #7192
    matthewlwolfe
    Participant

    Good morning, I am looking for a little tech support with regards to MTC program. I have a MAXX Air 24″ cutter and when I send the cutting file to the machine it doesn’t cut the profile in one long cut. The cut is made up of every different arc and line. Is there something I am doing incorrectly? This is very time intensive when I think it should just follow the profile in one continuous path. Before I export the image I am welding the shape together. Should I join instead of weld or should I leave all the separate image in complete separate individual entities? Any assistance would be greatly appreciated.

    #7197
    Darrel Farris
    Keymaster

    Without seeing the file and understanding what the end result is, it’s difficult to advise.  Can you email it to darrel@cutterpunk.com and I’ll take a look? Also, where’d the file originate that you’re working with?  Thanks!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Pin It on Pinterest