klic-N-print SD card capacity Computerized Cutting Systems and Supplies – KLIC-N-KUT › Forums › Cutters & Equipment › KLIC-N-PRINT 3D › klic-N-print SD card capacity Tagged: klic-n-print, sd This topic contains 3 replies, has 2 voices, and was last updated by Sandy 12 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts October 19, 2017 at 8:09 pm #27014 BlainParticipant Hello, I was just wondering what the maximum size sd card is that the Klic-N-Print can handle. Thank you, Blain October 20, 2017 at 2:31 pm #27024 SandyModerator I don’t know the maximum size, but I just tested using a 32 GB SD card and it had no problem loading and reading the x3g file. October 20, 2017 at 6:25 pm #27032 BlainParticipant Awesome Sandy, Thank you for the reply. I was going to get a 16GB thinking “Well, if they sent me an 8GB, surely it will handle 16GB” (Playing it safe) So I will go with 32 and I would think that should be plenty! Thanks again and Take care, Blain October 21, 2017 at 3:26 pm #27039 SandyModerator You’re welcome! Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.