New Orbit Computerized Cutting Systems and Supplies – KLIC-N-KUT › Forums › Cutters & Equipment › KNK Zing / Air / Orbit › New Orbit Tagged: orbit set up This topic contains 1 reply, has 2 voices, and was last updated by Sandy 11 months, 1 week ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts November 14, 2017 at 12:50 pm #27482 lwebb2ndParticipant New orbit, Just getting set up. I have two Zings already. Working through set up and needed to shut down to come back to it later. The off switch on the Orbit only moves the blade carriage slightly back and forth, but it doesn’t cut the machine off? Any suggestions? November 14, 2017 at 2:43 pm #27486 SandyModerator Press the button and hold for a second or two. That should turn it off. A quick press is used to abort a cut. It will immediately stop the cutter and the head will return to the home/startup origin. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.